
From the concentrate shed to the casthouse
Non-Ferrous Smelting
Raw material, carbon plant, slag and fume handling
Pictured: Shop-built alloy chutes
01 The wear you're fighting
Alumina, concentrate, coke and slag are all abrasive, and a smelter moves them around the clock. The chutes, elbows, liners and buckets that carry them wear from the receiving hopper to the baghouse.
You’ll get liners, chutes and fabricated wear parts for aluminum, copper, zinc and lead smelters, from raw material handling through the carbon plant and slag. We build to your drawing in our Birmingham shop.
Where it wears first
- Unloading hopper and transfer chute liners
- Alumina conveying elbows and wear backs
- Paste mixer and butt crusher liners
- Slag pot and dross bin liners
- Baghouse hoppers and ID fan liners
Fine, abrasive powder at speed
Alumina and crushed bath are hard, fine and often moved by air, so they cut the outside of pneumatic elbows and wear backs. Chromium carbide overlay belongs wherever the flow turns.
Concentrate that packs and hangs up
Damp concentrates and fines stick to rough plate and weld beads, then bridge in chutes and bins. A smooth, bead-free face keeps them moving to the dryer and furnace.
Hot, heavy slag and dross
Slag pots, dross and skims are heavy and come out of the furnace hot. The handling equipment and reclaim feeders take hard hits, so their impact zones need thick, through-hardened plate.
Wet, corrosive process areas
Wet concentrate and wash water rust plain steel while the material wears it down. A stainless wear plate handles abrasion and corrosion together in those zones.
02 What TASSCO builds
Built off your spare set, or measured on the machine
Raw material receiving
- Ship and rail unloading hopper liners
- Concentrate and alumina transfer chutes
- Stockpile reclaim feeder liners
Alumina and bath handling
- Pneumatic conveying elbows and wear backs
- Alumina silo discharge cones
- Bath crusher and screen liners
Carbon and anode plant
- Coke and pitch handling chutes
- Paste mixer liners and paddles
- Butt crusher and anode cleaning liners
Concentrate and flux
- Concentrate dryer and feed chutes
- Flux and reverts bins and hoppers
- Bucket elevator and screw liners
Slag, dross and skims
- Slag pot handling and bucket liners
- Dross and skim bin liners
- Slag granulation launder liners
Fume, dust and yard
- Baghouse hoppers and screw conveyors
- ID fan housing and blade liners
- Loader bucket liners and cutting edges
03 Right grade, right wear zone
The grades non-ferrous smelting customers run
Every grade ships from stock as plate, cut to size, or fully fabricated. Every TASSCO product works here; these are the ones matched to your wear zones.
COMP-C
Welded chromium carbide overlay, 3/8″ to 1½″
- Alumina and coke elbows
- Butt crusher and paste mixer liners
Fused Alloy
Fusion-bonded chromium carbide overlay
- Concentrate and alumina chutes
- Smooth face so fines keep moving
TASSCO HD
Heavy-gauge wear plate, 1¼″ to 5″
- Slag and dross handling impact zones
- Crusher and reclaim feeders
CORRHARD
12% chromium martensitic stainless, 3/16″ to 1″
- Wet concentrate and scrubber zones
- Upgrade from 304 stainless
Flagship grade · Melted and made in USA
TASSCO XT
Hard from face to centerline, consistent from heat to heat, and your shop welds it with standard procedure. Stocked 3/16″ to 1″.
04 Shop-built, field-proven

Fabricated transition chute 
Lined chute sections, ready to ship 
Fabricated hopper, ready to ship
05 · How we work
One supplier, one number to call
Measure
Off your spare set, off the machine, or with LiDAR scanning and DEM modeling.
Draw
Grade, thickness, holes and bends. Kept on file for next time.
Fabricate
Cut, formed, rolled, beveled and drilled in our Birmingham shop.
Deliver
Marked and kitted for the changeout, ready to bolt up or weld in.
Questions we hear
Non-Ferrous Smelting wear questions
Want it all on two pages? Download the Non-Ferrous Smelting guide (PDF).
What liner should I use for alumina and coke conveying elbows?
COMP-C is a good fit for alumina and coke elbows. It puts a 60 HRC chromium carbide face on a mild steel base that forms and welds with conventional practice, and it also lines butt crushers and paste mixers.
How do I keep concentrate from hanging up in chutes?
Line concentrate and alumina chutes with Fused Alloy. It's a fusion-bonded chromium carbide overlay with a smooth, bead-free face, at 0.33 CoF as produced against about 0.47 for welded overlay, so fines keep moving. It rolls into pipes, cones and transitions too.
What wear plate holds up in slag and dross handling?
Use TASSCO HD in slag and dross handling impact zones, crushers and reclaim feeders. It's through-hardened to 450 BHN in sections from 1¼″ to 5″, with the toughness to take repeated hard hits without cracking or warping.
Is there an abrasion-resistant stainless for wet smelter areas?
CORRHARD is a 12% chromium martensitic stainless with nearly twice the hardness of 304 and similar corrosion resistance. It's a straight upgrade from 304 in wet concentrate and scrubber zones, and your shop welds it with standard 309L practice.

Let's talk
Tell us what's wearing out. We'll have your back.
Call us or send a note below. You'll hear back from a real person, fast.


