From the wood hog to the mixer

Charcoal & Briquetting

Wood hogs, screws, furnaces, dryers and mixers

Pictured: Bark hog grate

01 The wear you're fighting

A charcoal or briquette plant pushes wood, char and binder through hogs, screws, furnaces and mixers every shift. Each grate, trough and liner in that path takes impact, abrasion or heat, and the one that gives out first sets your maintenance schedule.

You’ll find TASSCO parts on the hogs, screws and mixers that keep charcoal and briquette plants running. Send us your drawing or your worn part, and we’ll match the grade to the wear and build it to fit.

Where it wears first

  • Hog grates, hammers and anvil tips
  • Screw flights and trough liners
  • Drag chain flights and side liners
  • Furnace discharge screws and rotary airlocks
  • Dryer fan blades and pneumatic line elbows
  • Mixer paddles and muller liners
  • Impact in the hog

    Wood, bark and the odd piece of tramp metal hit hog grates, hammers and anvil tips at full rotor speed. Those parts need thick, through-hardened steel that takes repeated blows without cracking, with overlay added where the wear runs fastest.

  • Sliding abrasion in screws and conveyors

    Chips, fines and char scrub screw flights, trough liners and drag conveyor floors every hour the plant runs. Charcoal is abrasive, and a hard, smooth overlay face slows the wear and keeps material sliding.

  • Heat at the furnace and dryer

    Furnace discharge screws, furnace rolls and dryer walls work hot, and hot steel wears differently than cold. We look at the temperature each part actually sees and pick the grade and design to match.

  • Fines in the air and in the mix

    Dust carried in the air stream wears dryer fan blades and pneumatic line elbows from the inside. Downstream, damp char and binder cling to weld beads and rough corners in mixers and screws. Wear-back elbows and bead-free liners keep both problems in check.

02 What TASSCO builds

Built off your spare set, or measured on the machine

  • Wood hogs and hammermills

    • Montgomery and Brunette hog grates
    • Hog side, door and back wall liners
    • Hammers, anvil tips and holders, rebuilt
  • Screws and conveyors

    • Shaftless and twin reclaimer screws
    • Screw troughs and trough liners
    • Drag chain, flights, sprockets and side liners
  • Furnaces and char handling

    • Furnace and char cyclone discharge screws
    • Furnace rolls
    • Rotary airlock feeders
  • Dryers and air

    • Dryer wall liners
    • Dryer fan blades
    • Wear-back elbows for pneumatic lines
  • Mixing and mulling

    • Scott mixer liners and paddles
    • Simpson muller wall and turret liners
    • Spider liners
  • Wet bin and yard

    • Wet bin screws
    • Pit drag head pulleys
    • Dozer blade liners

04 Shop-built, field-proven

  • Finished screw conveyor sitting in its matching trough
    Screw conveyor and trough
  • Drag chain conveyor built in house in the TASSCO shop
    Drag chain conveyor, built in house

05 · How we work

One supplier, one number to call

  1. Measure

    Off your spare set, off the machine, or with LiDAR scanning and DEM modeling.

  2. Draw

    Grade, thickness, holes and bends. Kept on file for next time.

  3. Fabricate

    Cut, formed, rolled, beveled and drilled in our Birmingham shop.

  4. Deliver

    Marked and kitted for the changeout, ready to bolt up or weld in.

Questions we hear

Charcoal & Briquetting wear questions

Want it all on two pages? Download the Charcoal & Briquetting guide (PDF).

What wear plate should I use for hog grates and hammers?

Hog grates, anvils and hammers take heavy impact, so most plants start with TASSCO HD. It's through-hardened to the core in sections from 1¼″ to 5″ and takes repeated hard hits without cracking. On hog anvils and hammers, we add overlay where the wear runs fastest.

How do I keep charcoal from hanging up in screw troughs and conveyors?

Line them with Fused Alloy. Its fusion-bonded chromium carbide face is smooth and bead-free, at 0.33 coefficient of friction as produced against about 0.47 for welded overlay, so char has less to grab. It also rolls into the curved shapes a trough needs.

Can you rebuild hog hammers and anvil tips?

Yes. Send us your worn hammers, anvil tips and holders and we'll rebuild them, or we'll build new ones from your drawing or your worn part in our Birmingham shop.

Can you build replacement liners for a Scott mixer or Simpson muller?

Yes. We build Scott mixer liners and paddles, Simpson muller wall and turret liners, and spider liners from your drawing or the worn part, then cut and fabricate them in Birmingham.

Let's talk

Tell us what's wearing out. We'll have your back.

Call us or send a note below. You'll hear back from a real person, fast.

(205) 949-2725