Duracorr and Duracorr 300 replacement

Need Duracorr 300? We have CORRHARD in stock.

CORRHARD is a 12% chromium abrasion-resistant stainless plate for the same wet, abrasive jobs that call for Duracorr and Duracorr 300. TASSCO has supplied it for as long as we’ve been in business.

Same jobs, ready to ship

Hard enough for the wear, stainless enough for the water

If you’ve bought Duracorr 300 before, CORRHARD will feel familiar. It’s a 12% chromium stainless in the 300 BHN class, nearly twice the hardness of 304 with similar corrosion resistance. It’s magnetic, and your shop welds it with standard 309L practice.

Where corrosion and abrasion are both present, it lasts 3–5× longer than 304. That’s why you’ll find it in coal prep plants, salt and potash mines, beet mills, paper mills and bulk terminals.

Bucket elevator of a barge unloader with buckets fabricated from TASSCO CORRHARD
Barge unloader buckets fabricated from TASSCO CORRHARD

CORRHARD at a glance

Martensitic stainless
12% CrMartensitic stainless
BHN, 314 typical in ¼″–½″
296–325BHN, 314 typical in ¼″–½″
Standard weld practice
309LStandard weld practice
Charpy toughness holds
−50°FCharpy toughness holds

Stocked 3/16″ · ¼″ · ⅜″ · ½″ · ¾″ · 1″ in 8′×20′, 8′×10′, 4′×10′, 4′×8′ sheets. Made in USA.

Switching takes one call

Bring the Duracorr spec you already have

  1. Send what you have

    The spec, the drawing, the part number you buy today, or a photo of the worn part.

  2. We quote CORRHARD

    As plate, cut to size, or as a finished part from our Birmingham shop.

  3. It ships from stock

    3/16″ to 1″, cut, formed, rolled and fabricated in house.

Where it goes

The same chutes, hoppers and liners

  • Wash-plant chutes
  • Transfer-point liners
  • Conveyor & belt liners
  • Hoppers, bins & silos
  • Sump & pit liners
  • Cyclone overflow boxes
  • Slurry & pump housings
  • Flumes, troughs & launders
  • Wet-process chute work
  • Screen & dewatering decks
  • Bucket-elevator liners
  • Scrubber & wash-box liners

Industries

Where you’ll find CORRHARD working

New to abrasion-resistant stainless? See how it compares with AR plate and 304.

Questions we hear

Duracorr replacement questions

What replaces Duracorr 300?

CORRHARD from TASSCO. It’s a 12% chromium abrasion-resistant stainless plate in the 300 BHN class, stocked 3/16″ to 1″, and it goes in the same places Duracorr 300 goes: chutes, hoppers, liners, buckets and wet-process equipment.

Is CORRHARD the same as Duracorr?

CORRHARD is sold under the TASSCO name. It’s built for the same service as Duracorr 300, where abrasion and corrosion happen at the same time. Send us the spec you’re working from, and we’ll confirm the fit before you order.

Can I still get Duracorr 300?

We can’t speak to anyone else’s supply. What we can tell you is that CORRHARD is in stock in Birmingham today, 3/16″ to 1″, and covers the same jobs.

What sizes of CORRHARD do you stock?

Thicknesses 3/16″, ¼″, ⅜″, ½″, ¾″, 1″, in 8′×20′, 8′×10′, 4′×10′, 4′×8′ sheets. We also cut, form, roll, drill and fabricate it, so you can order finished parts.

How does my shop weld CORRHARD?

CORRHARD welds with standard 309L practice, and its Charpy toughness holds from room temperature down to −50°F. If you want us to check your weld procedure against it, send it with your drawing.

Is CORRHARD made in the USA?

Yes.

Send us your spec

Tell us what your spec calls for. We’ll quote CORRHARD against it.

Call us or send a note below with your spec, drawing or part number. You’ll hear back from a real person, fast.

(205) 949-2725

Duracorr is a registered trademark of its owner. TASSCO is not affiliated with or endorsed by that owner, and the name appears here only to identify the specifications CORRHARD can replace. CORRHARD is a TASSCO product.