Abrasion-resistant stainless steel

Stainless plate that’s hard enough to wear

When material is wet and abrasive at the same time, carbon AR plate rusts away and 304 stainless wears through. Abrasion-resistant stainless handles both. CORRHARD is a 12% chromium plate at 296–325 BHN, stocked in Birmingham.

Why wet wear is different

Corrosion and abrasion feed each other

In a wash plant chute, a salt hopper or a beet flume, water turns the surface of carbon steel to rust, and the material scrubs that rust right off. Fresh steel is exposed, it rusts again, and the plate thins out faster than wear alone would explain.

Plain stainless stops the rust, but at 120–178 BHN, 304 is too soft to stand up to the material. Abrasion-resistant stainless closes that gap. CORRHARD runs nearly twice the hardness of 304 with similar corrosion resistance, and it’s magnetic and weldable with standard 309L practice.

Hoppers lined with CORRHARD abrasion-resistant stainless plate
CORRHARD-lined hoppers

Pick the right plate

Carbon AR, 304 or abrasion-resistant stainless

Carbon AR plate (AR400 class)304 stainlessCORRHARD
HardnessAbout 360–440 BHN120–178 BHN296–325 BHN
Corrosion resistanceLow. Rusts in wet serviceGoodSimilar to 304
MagneticYesNoYes
In wet, abrasive serviceRust forms and wears off with the material, so you lose steel two waysStands up to the water, but the material wears it throughTakes both. 3–5× the life of 304 where corrosion and abrasion are both present

Typical values, for reference. Carbon AR and 304 figures are typical published ranges. CORRHARD figures are from its product sheet.

Dry service? Through-hardened plate such as TASSCO XT is the better fit. Heavy sliding abrasion with no water? Look at COMP-C chromium carbide overlay.

Where it pays off

Wet, abrasive, and hard on steel

  • Wash-plant chutes
  • Transfer-point liners
  • Conveyor & belt liners
  • Hoppers, bins & silos
  • Sump & pit liners
  • Cyclone overflow boxes
  • Slurry & pump housings
  • Flumes, troughs & launders
  • Wet-process chute work
  • Screen & dewatering decks
  • Bucket-elevator liners
  • Scrubber & wash-box liners

Industries

Where you’ll find it working

Also called

AR stainless, wear-resistant stainless, corrosion-resistant wear plate or 12% chrome stainless plate. Many specs still name Duracorr or Duracorr 300.

Replacing Duracorr 300? →

In stock in Birmingham

CORRHARD, 3/16″ to 1″

Order it as plate or cut to size, or send a drawing and we’ll form, roll, drill and fabricate the finished part in our own shop. Made in USA.

Questions we hear

Abrasion-resistant stainless questions

What is abrasion-resistant stainless steel?

It’s stainless plate that’s hard enough to take sliding wear. CORRHARD is a 12% chromium martensitic stainless at 296–325 BHN, nearly twice the hardness of 304, with similar corrosion resistance. You use it where material is wet and abrasive at the same time.

Is abrasion-resistant stainless better than AR400?

It depends on the water. In dry service, through-hardened AR plate such as TASSCO XT is the better choice. Once water, salt or wet fines are in the mix, carbon AR plate rusts and loses steel to corrosion as well as wear, and that’s where abrasion-resistant stainless lasts longer.

Is 12% chromium stainless magnetic?

CORRHARD is. That matters if you’re replacing 304: don’t substitute it where 304 runs beneath a magnet.

How do you weld abrasion-resistant stainless plate?

CORRHARD welds with standard 309L practice. Its Charpy toughness holds from room temperature down to −50°F, so it doesn’t turn brittle in the cold the way standard 12% chromium plate can.

Is there a replacement for Duracorr 300?

Yes. CORRHARD is a 12% chromium abrasion-resistant stainless plate in the 300 BHN class, stocked 3/16″ to 1″, and it covers the same wet, abrasive jobs. Send us your spec and we’ll quote it.

Wet and wearing out?

Tell us what’s rusting and wearing at the same time.

Call us or send a note below with a drawing, a spec or a photo of the worn part. You’ll hear back from a real person, fast.

(205) 949-2725

Duracorr is a registered trademark of its owner. TASSCO is not affiliated with or endorsed by that owner. CORRHARD is a TASSCO product.