Keep the pit running

Aggregate & Quarry

Crushers, feeders, screens, loaders and haul trucks

01 The wear you're fighting

Rock doesn't care how new your equipment is. In a quarry or sand and gravel plant, the parts that crush, screen and move stone take a beating every shift, and each one that gives out early is a shutdown you didn't plan.

You’ll find TASSCO steel in quarries and sand and gravel plants across the Southeast and beyond, usually in the spots that used to fail first. We build off your spare set or measure the machine, match the grade to each wear zone, and fabricate to your contours.

Where it wears first

  • Crusher cheek plates and main frame liners
  • Grizzly bars and feeder floors
  • HSI aprons and housing liners
  • Chutes, hoppers and skirtboards
  • Loader buckets and haul truck boxes
  • Impact at the top of the circuit

    Shot rock lands on feeder floors, grizzly bars and jaw cheek plates at full drop height. Thin or brittle plate cracks there long before it wears out, so the first wear zones need thickness and toughness together.

  • Sliding abrasion everywhere after the crusher

    Once stone is sized, it scrubs. Chutes, pan liners, cone main frames and HSI housings lose metal to a steady stream of sharp, silica-rich material, and that's where hard overlay pays for itself.

  • Fines that pack and hang up

    Wet fines and screenings build up on weld beads and rough surfaces, then choke a chute or feeder. A smooth, bead-free face keeps material moving and keeps your crew off the shovel.

  • Mobile iron that never stops

    Loader buckets, dozer blades and haul truck boxes take impact and abrasion in the same pass. Liner packages built to your machine keep the iron working between rebuilds.

02 What TASSCO builds

Built off your spare set, or measured on the machine

  • Jaw and cone crushers

    • Feeder floors, cheek plates, pitman face plates
    • Grizzly bars, tops and complete assemblies
    • Main frame liners, wear rings, counterweight guards
  • Impact crushers (HSI)

    • Housing, side wall and rotor circle tip liners
    • Apron and curtain liners, plate up to 5″
    • Discharge chute liners and full chutes
  • Feeders, hoppers and screens

    • Vibratory feeder pan, floor and side liners
    • Hopper liners and skirtboard liners
    • Punch plate screens in XT, 3/16″ to 1″ thick
  • Loaders and excavators

    • Full bucket rebuilds and liner packages
    • Cutting edges, base edges, lip protectors
    • Cheek and wall plates, heel plates
  • Dozers, graders and draglines

    • Blade liners in custom size and thickness
    • Push plates and push arm liners
    • Dragline and shovel bucket packages
  • Off-road and haul trucks

    • Custom truck box floor packages
    • Side wall and tail liner packages
    • XT or HD in drop zones, COMP-C in tails

04 Shop-built, field-proven

  • Cone crusher with TASSCO XT main frame liners and COMP-C wear rings
    Cone crusher: XT main frame liners, COMP-C wear rings
  • Feeder lined with COMP-C under a hopper lined with Fused Alloy
    COMP-C lined feeder, Fused Alloy lined hopper

Precision Flow · Engineered transfer chutes

Steady flow, less dust, longer belts

Precision Flow fixes the transfer points that plug, spill, throw dust or chew up belts. We scan the chute, model your material with DEM, and redesign it so the stream lands centered and at belt speed. You see it work in the model before we cut any steel.

DEM model of an OEM rock box at a screen discharge, showing material piling up
As built
DEM model of the Precision Flow redesign, with a steady stream to the belt
Precision Flow

05 · How we work

One supplier, one number to call

  1. Measure

    Off your spare set, off the machine, or with LiDAR scanning and DEM modeling.

  2. Draw

    Grade, thickness, holes and bends. Kept on file for next time.

  3. Fabricate

    Cut, formed, rolled, beveled and drilled in our Birmingham shop.

  4. Deliver

    Marked and kitted for the changeout, ready to bolt up or weld in.

Questions we hear

Aggregate & Quarry wear questions

Want it all on two pages? Download the Aggregate & Quarry guide (PDF).

What wear plate works best for crusher cheek plates and grizzly bars?

Those spots take heavy impact, so most quarries start with TASSCO HD. It's through-hardened to 450 BHN in thick sections from 1¼″ to 5″ and stays tough down to −50°F, so it holds up to shot rock without cracking.

Should I line chutes with chromium carbide overlay or through-hardened plate?

Where the wear is mostly sliding abrasion, chromium carbide overlay like COMP-C or Fused Alloy usually lasts longest. Where big rock drops straight onto the liner, through-hardened TASSCO XT or HD handles the impact better. Many chutes use both: hard plate in the drop zone, overlay where material slides.

Can you build liners for my crusher without OEM drawings?

Yes. We can work off your spare set, measure the machine on site, or scan it. We draw it, keep the drawing on file, and cut, form and fabricate the parts in our Birmingham shop.

How do I stop fines from building up in a chute?

Fused Alloy has a smooth, bead-free face, so wet fines have nothing to grab. If the chute geometry is the problem, Precision Flow redesigns the chute in a flow model before any steel is cut.

Let's talk

Tell us what's wearing out. We'll have your back.

Call us or send a note below. You'll hear back from a real person, fast.

(205) 949-2725