From the raw coal pile to the train

Coal Mining & Preparation

Rotary breakers, vessels, screens, bins and chutes

Pictured: Rotary breaker with TASSCO XT screens

01 The wear you're fighting

Raw coal comes in with rock, water and fines, and your prep plant has to break, wash, size and dewater all of it. The breakers, vessels, screens and chutes doing that work wear fast, and one that gives out early stops the circuit.

Send us your drawing or your worn part, and we’ll build the replacement in Birmingham with the grade matched to each wear zone. Tell us where your plant loses the most time, and we’ll start there.

Where it wears first

  • Rotary breaker screens and lifters
  • Heavy media vessel liners and flights
  • Sump tops and wet screen plates
  • Bunker feeder pans and skirtboards
  • Transfer, crusher feed and load-out chutes
  • Longwall shearer drums
  • Rock in the run-of-mine coal

    Raw coal shows up with roof and floor rock mixed in. In the rotary breaker, that rock tumbles against screens, lifters and plows on every turn, and at the grizzly it lands hard. Those parts need a hard wear face that also takes impact.

  • Heavy media that scours

    Vessels and washer bottoms run in a slurry of water and fine magnetite that wears steel steadily, shift after shift. Overlay liners on vessel walls and washer bottoms hold their shape much longer than plain plate.

  • Water that never dries out

    Sump tops, wet screen plates and dewatering decks stay wet around the clock, so carbon plate rusts while it wears. Stainless wear plate stops the rust-through and still stands up to abrasion.

  • Fines that hang up

    Wet coal and fines pack onto weld beads and rough plate until a feeder pan or chute stops flowing. A smooth, bead-free liner keeps coal moving from the bunker to the train.

02 What TASSCO builds

Built off your spare set, or measured on the machine

  • Rotary breakers

    • Rotary breaker screens
    • Lifters, plows and segmented sprockets
    • Breaker feed chute liners
  • Heavy media vessels

    • Peters and Daniels vessel liner sets
    • Vessel flights, sprockets, tracks and clips
    • Washer bottoms in COMP-C or Fused Alloy
  • Screens and sump tops

    • Scalping, top deck and intermediate screen decks
    • Raw coal and heavy media sump tops
    • Deslime and gradient deck plates
  • Dewatering and fines

    • Dewatering screws and XT troughs
    • Stainless screen plates and dilute sump tops
    • Screen springs and screen rolls
  • Bins, feeders and chutes

    • Rock and gob bin liners and cone sections
    • Bunker feeder pans and slope liners
    • Transfer, crusher feed and load-out chute liners
  • Mining equipment

    • Longwall shearer drums armored with Range Tuff
    • Drag conveyor liners
    • Dozer liners and patches

04 Shop-built, field-proven

  • Longwall shearer drum armored with Range Tuff weld-on wear parts
    Longwall shearer drum, Range Tuff armored
  • Fabricated hopper finished in the TASSCO shop and ready to ship
    Fabricated hopper, ready to ship
  • Sump top screen panels for a coal preparation plant
    Sump top screens

Precision Flow · Engineered transfer chutes

Steady flow, less dust, longer belts

Precision Flow fixes the transfer points that plug, spill, throw dust or chew up belts. We scan the chute, model your material with DEM, and redesign it so the stream lands centered and at belt speed. You see it work in the model before we cut any steel.

DEM model of an OEM rock box at a screen discharge, showing material piling up
As built
DEM model of the Precision Flow redesign, with a steady stream to the belt
Precision Flow

05 · How we work

One supplier, one number to call

  1. Measure

    Off your spare set, off the machine, or with LiDAR scanning and DEM modeling.

  2. Draw

    Grade, thickness, holes and bends. Kept on file for next time.

  3. Fabricate

    Cut, formed, rolled, beveled and drilled in our Birmingham shop.

  4. Deliver

    Marked and kitted for the changeout, ready to bolt up or weld in.

Questions we hear

Coal Mining & Preparation wear questions

Want it all on two pages? Download the Coal Mining & Preparation guide (PDF).

What's the best liner for heavy media vessels and washer bottoms?

Most prep plants line vessels and washer bottoms with COMP-C, a chromium carbide overlay welded to a mild steel base. Fused Alloy is the other option for washer bottoms, with a 700 BHN fusion-bonded face that runs about twice the life of welded overlay.

Why do my sump tops and wet screen plates rust through so fast?

They stay wet, so carbon steel corrodes while it wears. CORRHARD is a 12% chromium martensitic stainless at 296–325 BHN, nearly twice the hardness of 304, and it runs 3–5× the life of 304 stainless where corrosion and abrasion are both present. Your shop welds it with standard 309L practice.

How do I keep coal from hanging up in bunker feeders and chutes?

Line them with Fused Alloy. Its smooth, bead-free face gives wet coal and fines nothing to grab. If the chute's shape is the problem, Precision Flow models the flow and redesigns the chute before any steel is cut.

How do you protect longwall shearer drums from wear?

We armor drums and cutter heads with Range Tuff, a 700 BHN high-chrome white iron bonded to a mild steel backer. The backer welds straight onto the drum, so you replace worn bars instead of rebuilding the drum.

Let's talk

Tell us what's wearing out. We'll have your back.

Call us or send a note below. You'll hear back from a real person, fast.

(205) 949-2725